Brand :
FESTOThe DGE-40-800-ZR-LK-RV-KF-GA (order number 193743) is a FESTO DGE series electric cylinder/guide actuator.
This product uses a 40mm gauge and has an 800mm stroke, integrating a high-precision linear guide and ball screw drive mechanism to convert the rotary motion of the motor into the precise linear motion of the slider. It is suitable for automated handling, assembly, and inspection equipment requiring high dynamic response and high positioning accuracy.

| Brand |
FESTO |
| Model / Part Number | DGE-40-800-ZR-LK-RV-KF-GA |
| Order No. | 193743 |
| Product Type | Electric Cylinder / Guide Actuator |
| Dimensions | 40 mm |
| Stroke | 800 mm |
| Guiding Method | Recirculating Ball Bearing Guide Rail |
| Drive Method | Ball Screw |
| Motor Connection | ZR (Direct Connection) |
| Position Sensing | LK (Proximity Switch Slot) |
| Buffer | RV (Adjustable Buffer) |
Q: What are the main applications of DGE electric cylinders?
A: Primarily used for linear motion control requiring high precision and dynamic response. Examples include precision dispensing and PCB positioning in electronic assembly lines; pressing and handling in automotive parts assembly lines; and sampling and pipetting in medical equipment. Compared to pneumatic actuators, electric cylinders offer more precise positioning control and a more flexible motion curve.
Q: How heavy a load can the 800mm stroke DGE-40 handle?
A: Load capacity needs to be calculated based on speed, acceleration, and installation method. Generally, the DGE series can handle loads of tens of kilograms in the 40mm specification, but specific values should be referenced from FESTO's official load curves. It is recommended to accurately calculate the load using selection software based on actual working conditions (horizontal/vertical, movement speed, acceleration/deceleration time).
Q: What should be considered during purchase and installation?
A: Three points to note:
The motor needs to be purchased separately: This model usually does not include a motor; a servo motor or stepper motor and driver must be selected separately according to control requirements.
Controller Selection: A motion controller or PLC is required to achieve precise position and speed control.
Installation Accuracy: The mounting surface should have sufficient flatness and rigidity to ensure guiding accuracy and lifespan.
leave a message
Scan to Wechat :
Scan to WhatsApp :